Astrill Wiki - User contributions [en]

Astrill Setup Manual:Getting started with ASUS Merlin firmware for routers

2023-07-10T12:35:00Z

Ammar:

[https://www.astrill.com/wiki/Astrill_Setup_Manual:Installing_Astrill_VPN_applet_onto_your_DD-WRT_flashed_routers Install Astrill Router Applet] directly onto ASUS Merlin firmware (RMerlin/ASUSWRT-Merlin firmware) routers.

== Install ASUSWRT-Merlin Firmware ==

First check if you have [https://www.astrill.com/astrill-vpn-routers/self-made compatible router], and then install ASUS Merlin Firmware onto your router.

'''<u>ASUSWRT-Merlin firmware supported routers:</u>'''

GT-AC2900

RT-AX86U

RT-AX56U

RT-AX58U

RT-AX88U

RT-AX3000

RT-AC66U_B1

RT-AC86U

RT-N66U

RT-AC1900

RT-AC87U

RT-AC5300

RT-AC3200

RT-AC3100

RT-AC88U

RT-AC68U

RT-AC66U

RT-AC56U

'''ASUSWRT-Merlin Firmware:'''

---------------------------------------------------------------------------------
Developer website: https://www.asuswrt-merlin.net/

Changelog: https://github.com/RMerl/asuswrt-merlin/blob/master/README-merlin.txt

Source code: https://github.com/RMerl/asuswrt-merlin

'''Download:''' https://sourceforge.net/projects/asuswrt-merlin/files/

---------------------------------------------------------------------------------

== Enable JFFS on ASUS Router ==

'''Enable JFFS before installing the Astrill applet.'''
On router UI we have to enable "Format JFFS partition at next boot" and "Enable JFFS custom scripts and configs" options under [http://192.168.1.1/Advanced_System_Content.asp Administration / System] tab and reboot router.

[[File:Enable-jffs-asus-merlin1.png]]

<i>NOTE: If you don't see JFFS on settings tab, please verify if you have installed ASUSWRT-Merlin firmware. Make sure you see '''(Merlin build)''' next to firmware version.</i>

== Installation of Astrill router applet ==

Login into your account from Astrill website and go to '''VPN SERVICE > Router Set-up''' & copy '''Installation Command'''.

https://www.astrill.com/member-zone/tools/router-set-up

[[File:Asus-router-installation-command.png|800px]]

== Enable SSH on your router ==

Once it is enabled SSH into your router using this command in any command line tool: ssh admin@192.168.1.1

'''Note:''' You need to replace '''admin''' & '''192.168.1.1''' with your router's username and [https://www.astrill.com/what-is-my-ip IP address.]

== Execute installation command ==

Once you're logged-in into your router through SSH, execute AstrillVPN Applet installation command. AstrillVPN Applet will be installed with a success message like this:

'''Astrill router applet [version] installed successfully!'''

If you need assistance, contact us at: '''support@astrill.com'''

Astrill Setup Manual:Common Problems and Solutions (Troubleshooting)

2023-07-07T12:44:36Z

Ammar:

=WHEN ASTRILL IS CONNECTED BUT CERTAIN SITES ARE NOT ACCESSIBLE.=

1) Clear your browser cookies and cache.

2) You can try clearing your flash cache and cookies using this link (make sure to delete all sites and confirm the prompt)-
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html

then restart browser and it should work

Switch to any [https://www.astrill.com/network/vpn-servers US server] and report back if this works out any better for you.

How to select different servers in Astrill application -
http://i34.tinypic.com/2hxbl87.jpg

=WHEN CONNECTED TO OPENWEB BUT SPEED IS ZERO=

Help>>Reset Settings on Astrill Application.

Then Please try this:

1. Open Astrill

2. Settings->OpenWeb Options: CHECK "Set System Proxy"

3. Change port to 8642

4. Restart Astrill

Then try with USA via Korea

OR

Help>Speed Test on Astrill Application.

Use this to find the fastest server for your connection.

=IF YOU ARE HAVING TROUBLE CONNECTING USING MOBILE DEVICE=

We suggest you to type server IP instead of address and try again.

You can find list of all servers here:

https://members.astrill.com/tools/vpn-servers

Once you pick up a server, to get its IP address type on your PC in console (cmd.exe on Windows/ Terminal on Macintosh):

nslookup xx.astrill.net

This will give you IP address [https://www.astrill.com/what-is-my-ip IP address]of server, type that on your phone.

Also it is possible that your phone uses a proxy from your ISP, You can try to disable ISP proxy in phone settings.

=WHEN TUN/TAP IS NOT WORKING=

Please go to Control Panel --> Network and Internet --> Network Connections --> 'Change Adapter Settings' and enable 'Astrill SSL VPN'
To do so, right click on 'Astrill SSL VPN' and select 'Enable'

If you can't find 'Astrill SSL VPN' under 'Change Adapter Settings', you would need to do the following.

Log in to Astrill application --> Press and hold the 'CTRL' key on keyboard and click on HELP tab in Astrill application.Then click on 'TAP Hide/Show' option and confirm the Windows prompt to allow changes. 'Astrill SSL VPN' will appear under 'Change Adapter Settings' and you can enable it.

OR IF ABOVE DOES NOT WORK, YOU CAN FOLLOW THESE

1) run cmd.exe as Administrator

2) Call the following commands to disable driver signature enforcement

bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON

3) Reboot computer, and during boot press F8, and select "Disable Driver Signature Enforcement"

4) When you boot into Windows, reinstall Astrill.

http://dropbox.astrill.com/file-mM2nSlhsww2HMhNp.nJDiS5o2ME7dw4yZy4Cyyvk/F8-Disable-Driver-Signature.png

=MAC DOES NOT ALLOW APPLICATIONS WHICH ARE NOT DOWNLOADED FROM APPLE STORE=

Please go to System Preferences>> Security and Privacy>> General tab. You will see there 'Allow applications downloaded from:' and select 'Anywhere'. This should fix the problem.

=WHEN CONNECTED TO US SERVER BUT DIRECTED TO CHINA/HONGKONG GOOGLE=

Open:
http://www.google.com/ncr

Then you will get an English Version.

=CERTAIN SITES ARE NOT WORKING WHEN USING ASTRILL APPLET=

Please disable OpenDNS on your router and your PC as well. PC should use DHCP from VPN router. This way it will use Astrill DNS servers configured on router and all sites will work.

=WHEN REMEMBER PASSWORD IN ASTRILL APPLICATION DOES NOT WORK=

Help>Reset Settings on Astrill Application.

Now type your password. Login and Logout Astrill Application. Exit it.

Rerun Astrill. It should remember.

Make sure you don't copy/paste the password.

It won't keep it saved. If you copy/paste.

=NO INTERNET CONNECTION WHEN ASTRILL IS OFF/LOGOUT=

You can try these solutions below

Check browser network settings, remove any proxy.

If there is no proxy, you can change your DNS to google DNS. You can refer from this screenshot

https://dl.dropboxusercontent.com/u/55630999/screenshots/dns-settings-check.jpg

If it still does not work, you can follow these steps below

1. Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, click Settings, and then click Change PC settings.)

Tap or click Update and recovery, and then tap or click Recovery.

Under Refresh your PC without affecting your files, tap or click Get started.

Follow the instructions on the screen.

=WHEN HOMEPLAN IS NOT WORKING=

Make sure that you have not copied the application from other device. Astrill application should be downloaded to device directly from our download page

https://www.astrill.com/download

=HOW TO SETUP PERMANENT FIREWALL LINK TO ASTRILL IPSEC GATEWAY=

Our IPSec is compatible with Apple devices. We have not tested it on other devices, however some customers are using it on routers with success.

Cisco IPSec PSK configuration:

Here are parameters for the 1st phase:

- username/password: your astrill credentials

- preshared key (PSK): way2stars

- exchange mode: main or aggressive

- encryption: aes or 3des or des

- hash algorithm: sha1 or md5

- dhgroup: 1024-bit (group 2)

Here are parameters for the 2nd phase:

- encryption: aes or 3des or des or rijndael or blowfish or twofish

- authentication: hmac_sha1 or hmac_md5

- compression: deflate

=DNS interception is broken for Chromium browser=

We did intensive tests and found the issue is not in our software at all.

Recent Chrome/Chromium browsers have internal DNS client, so they bypass system DNS resolver. Astrill can control only system DNS resolver. There is an option to disable this new feature and use system resolver.

To do so, type:
chrome://flags

Then search for Asynchronous DNS, set it to Disabled. Restart browser. This should fix your issue.

Main Page

2023-06-22T12:45:38Z

Ammar:

Astrill is founded in 2009 as a response to increasing demand for personal VPN services by home users and travelers. Astrill is a registered Seychelles company focused mostly towards travelers and expats, who use Astrill VPN service for protected and unrestricted Internet access. After almost 10 years of existence, Astrill is expanding to USA, EU, Middle-East and Asian markets and today Astrill is the leader in the Global Personal VPN market.

We currently offer more than [https://www.astrill.com/network/vpn-servers 300 VPN servers] in 50 countries with diversity of available VPN technologies - [https://www.astrill.com/features/vpn-protocols/openweb OpenWeb], [https://www.astrill.com/features/vpn-protocols/stealth-vpn StealthVPN], [https://www.astrill.com/astrill-vpn-routers/self-made RouterPro VPN], OpenVPN, [https://www.astrill.com/features/vpn-protocols/wireguard Wireguard], PPTP, L2TP/IPSec, SSTP and Cisco IPSec. Our customers enjoy 24/7 customers support via Live chat, Email and Skype from our highly trained staff.

Astrill VPN service works on personal computers (Microsoft Windows, Apple Macintosh and Linux), hand-held devices ([https://www.astrill.com/download/ios iPhone], iPad, [https://www.astrill.com/download/android Android phones] and tablet devices such as Samsung Galaxy Tab etc.) as well as on compatible DD-WRT, Tomato, TomatoUSB, ASUS Merlin, RMerl/asuswrt-merlin based WiFi routers (for example Cisco E3000, Asus RT N-16, Asus RT-N66U etc.) We are constantly expanding our network and improving our plug-and-play software solutions.

== How to set up Astrill ==

{|
| align="center" | [[File:Windows-wiki600.svg|80px|link=https://www.astrill.com/wiki/index.php/Astrill_Setup_Manual#Windows|Windows]]
'''Windows'''
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| align="center" | [[File:Mac-os-wiki600.svg|80px|link=httsp://wiki.astrill.com/index.php/Astrill_Setup_Manual#Mac_OS_X|Mac OS X]]
'''MacOS'''
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| align="center" | [[File:Linux-wiki600.svg|80px|link=https://www.astrill.com/wiki/index.php/Astrill_Setup_Manual#Linux|Linux]]
'''Linux'''
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| align="center" | [[File:Android-phone-wiki600.svg|80px|link=https://www.astrill.com/wiki/index.php/Astrill_Setup_Manual#Android_Mobiles|Android Mobile]]
'''Android Mobile'''
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| align="center" | [[File:Android-tablet-wiki600.svg|80px|link=https://www.astrill.com/wiki/index.php/Astrill_Setup_Manual#Android_Tablets|Android Tablet]]
'''Android Tablet'''
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| align="center" | [[File:Kindle-wiki600.svg|80px|link=https://www.astrill.com/wiki/index.php/Astrill_Setup_Manual:How_to_configure_OpenVPN_with_FEATVPN_app_on_Android_tablet|Kindle Fire]]
'''Kindle Fire'''
|}

{|
| align="center" | [[File:Iphone-wiki600.svg|80px|link=https://www.astrill.com/wiki/index.php/Astrill_Setup_Manual#Apple_iPhone_and_iPod_Touch|Apple iPhone]]
'''Apple iPhone'''
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| align="center" | [[File:Ipad-wiki600.svg|80px|link=https://www.astrill.com/wiki/index.php/Astrill_Setup_Manual#Apple_iPad|Apple iPad]]
'''Apple iPad'''
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| align="center" | [[File:Apple-tv-wiki600.svg|80px|link=https://www.astrill.com/wiki/index.php/Astrill_Setup_Manual:Change_Gateway_and_DNS_on_Apple_TV|Apple TV]]
'''Apple TV'''
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| align="center" | [[File:Boxee-wiki600.svg|80px|link=https://www.astrill.com/wiki/index.php/Astrill_Setup_Manual:Change_Gateway_and_DNS_on_Boxee_Box|Boxee]]
'''Boxee'''
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| align="center" | [[File:Router-wiki600.svg|80px|link=https://www.astrill.com/wiki/index.php/Astrill_Setup_Manual#Routers|Routers]]
'''Routers'''
|}

== Links ==
* [https://www.astrill.com/wiki/index.php/Astrill_Application Astrill Application]
* [https://www.astrill.com/wiki/index.php/Astrill_Setup_Manual Astrill Setup Manual]
* [https://www.astrill.com/faq FAQ]