|
|
| Line 1: |
Line 1: |
| Install Astrill Router Applet directly onto ASUS Merlin firmware (RMerlin/ASUSWRT-Merlin firmware) routers.
| | Please check article about "Installation of Astrill Router Applet on Merlin" on following link: |
| | | https://wiki.astrill.com/Astrill_Setup_Manual:Getting_started_with_ASUS_Merlin_firmware_for_routers |
| == Install ASUSWRT-Merlin Firmware ==
| |
| | |
| First check if you have compatible router, and then install ASUS Merlin Firmware onto your router.
| |
| | |
| | |
| '''<u>ASUSWRT-Merlin firmware supported routers:</u>'''
| |
| | |
| GT-AC2900
| |
| | |
| RT-AX86U
| |
| | |
| RT-AX56U
| |
| | |
| RT-AX58U
| |
| | |
| RT-AX88U
| |
| | |
| RT-AX3000
| |
| | |
| RT-AC66U_B1
| |
| | |
| RT-AC86U
| |
| | |
| RT-N66U
| |
| | |
| RT-AC1900
| |
| | |
| RT-AC87U
| |
| | |
| RT-AC5300
| |
| | |
| RT-AC3200
| |
| | |
| RT-AC3100
| |
| | |
| RT-AC88U
| |
| | |
| RT-AC68U
| |
| | |
| RT-AC66U
| |
| | |
| RT-AC56U
| |
| | |
| | |
| '''ASUSWRT-Merlin Firmware:'''
| |
| | |
| ---------------------------------------------------------------------------------
| |
| Developer website: https://www.asuswrt-merlin.net/
| |
| | |
| Changelog: https://github.com/RMerl/asuswrt-merlin/blob/master/README-merlin.txt
| |
| | |
| Source code: https://github.com/RMerl/asuswrt-merlin
| |
| | |
| '''Download:''' https://sourceforge.net/projects/asuswrt-merlin/files/
| |
| | |
| ---------------------------------------------------------------------------------
| |
| | |
| == Enable JFFS on ASUS Router ==
| |
| | |
| '''Enable JFFS before installing the Astrill applet.'''
| |
| On router UI we have to enable "Format JFFS partition at next boot" and "Enable JFFS custom scripts and configs" options under [http://192.168.1.1/Advanced_System_Content.asp Administration / System] tab and reboot router.
| |
| | |
| [[File:Enable-jffs-asus-merlin1.png]]
| |
| | |
| | |
| <i>NOTE: If you don't see JFFS on settings tab, please verify if you have installed ASUSWRT-Merlin firmware. Make sure you see '''(Merlin build)''' next to firmware version.</i>
| |
| | |
| == Installation of Astrill router applet ==
| |
| | |
| Login into your account from Astrill website and go to '''VPN SERVICE > Router Set-up''' & copy '''Installation Command'''.
| |
| | |
| https://www.astrill.com/member-zone/tools/router-set-up | |
| | |
| | |
| [[File:Asus-router-installation-command.png|800px]]
| |
| | |
| | |
| == Enable SSH on your router ==
| |
| | |
| Once it is enabled SSH into your router using this command in any command line tool: ssh admin@192.168.1.1
| |
| | |
| '''Note:''' You need to replace '''admin''' & '''192.168.1.1''' with your router's username and IP address.
| |
| | |
| | |
| == Execute installation command ==
| |
| | |
| Once you're logged-in into your router through SSH, execute Astrill VPN Applet installation command. Astrill VPN Applet will be installed with a success message like this:
| |
| | |
| '''Astrill router applet [version] installed successfully!'''
| |
| | |
| If you need assistance, contact us at: '''support@astrill.com'''
| |
