Astrill Setup Manual:Common Problems and Solutions (Troubleshooting)

From Astrill Wiki
Revision as of 02:57, 10 December 2013 by Rosalie (talk | contribs) (→‎==)
Jump to navigation Jump to search

WHEN ASTRILL IS CONNECTED BUT CERTAIN SITES ARE NOT ACCESSIBLE.

1) Clear your browser cookies and cache.

2) You can try clearing your flash cache and cookies using this link (make sure to delete all sites and confirm the prompt)- http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html

then restart browser and it should work

Switch to any US server and report back if this works out any better for you.

How to select different servers in Astrill application - http://i34.tinypic.com/2hxbl87.jpg

WHEN CONNECTED TO OPENWEB BUT SPEED IS ZERO

Help>>Reset Settings on Astrill Application.

Then Please try this:

1. Open Astrill

2. Settings->OpenWeb Options: CHECK "Set System Proxy"

3. Change port to 8642

4. Restart Astrill

Then try with USA via Korea

OR

Help>Speed Test on Astrill Application.

Use this to find the fastest server for your connection.

IF YOU ARE HAVING TROUBLE CONNECTING USING MOBILE DEVICE

We suggest you to type server IP instead of address and try again.


You can find list of all servers here:

https://members.astrill.com/servers-list.php


Once you pick up a server, to get its IP address type on your PC in console (cmd.exe on Windows/ Terminal on Macintosh):

nslookup xx.astrill.net


This will give you IP address of server, type that on your phone.


Also it is possible that your phone uses a proxy from your ISP, You can try to disable ISP proxy in phone settings.

====================================================================================================

WHEN TUN/TAP IS NOT WORKING

Please go to Control Panel --> Network and Internet --> Network Connections --> 'Change Adapter Settings' and enable 'Astrill SSL VPN' To do so, right click on 'Astrill SSL VPN' and select 'Enable'


If you can't find 'Astrill SSL VPN' under 'Change Adapter Settings', you would need to do the following.


Log in to Astrill application --> Press and hold the 'CTRL' key on keyboard and click on HELP tab in Astrill application.Then click on 'TAP Hide/Show' option and confirm the Windows prompt to allow changes. 'Astrill SSL VPN' will appear under 'Change Adapter Settings' and you can enable it.

OR IF ABOVE DOES NOT WORK, YOU CAN FOLLOW THESE

1) run cmd.exe as Administrator

2) Call the following commands to disable driver signature enforcement

bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS bcdedit.exe -set TESTSIGNING ON

3) Reboot computer, and during boot press F8, and select "Disable Driver Signature Enforcement"

4) When you boot into Windows, reinstall Astrill.

http://dropbox.astrill.com/file-mM2nSlhsww2HMhNp.nJDiS5o2ME7dw4yZy4Cyyvk/F8-Disable-Driver-Signature.png

====================================================================================================