Astrill Setup Manual:How to configure PPTP on Tomato firmware flashed Routers: Difference between revisions

From Astrill Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
Port https://www.astrill.com/knowledge-base/62/PPTP---How-to-configure-PPTP-on-Tomato-firmware-Routers.html page into wiki.
== STEP 1 - Login to Astrill Website ==
 
 
 
[[File:Tomato_step1.jpg]]
 
 
 
# Login to Astrill website, click on '''Members''' tab.
# From the '''Members''' tab, click on '''VPN SERVICES''' tab.
# Click on '''Servers list''' section.
 
 
 
 
== STEP 2 - Choose a Server ==
 
 
 
[[File:Tomato_step2.jpg]]
 
 
 
# You will see the list of servers, and then choose the server of your choice e.g. '''GTX1.ASTRILL.NET'''.
 
 
 
 
 
== STEP 3 - PPTP Client Configuration ==
 
 
 
[[File:Tomato_step3.jpg]]
 
 
 
# Open Tomato web admin, and then navigate to '''VPN Tunneling'''
# Then choose '''PPTP Client''' section (http://192.168.1.1/vpn-pptp.asp).
# For '''Server Address''' type in '''GTX1.ASTRILL.NET'''.
# For '''Username''' type in your '''Astrill account email'''.
# For '''Password''' type in your '''Astrill account password'''. 
# For '''Encryption''' select '''None''' from drop down list.
# For '''Accept DNS configuration''' select '''Yes''' from drop down list.
# For '''Redirect Internet traffic''' tick the checkbox.
# For '''Create NAT on tunnel''' tick the checkbox.
# For '''MTU''' select '''Manual''' from drop down list, then type in 1400.
# For '''MRU''' select '''Manual''' from drop down list, then type in 1400.  
# When you are done click '''Save''' button below, and to start VPN connection click '''Start Now''' button.

Revision as of 18:17, 10 October 2012

STEP 1 - Login to Astrill Website

Tomato step1.jpg


  1. Login to Astrill website, click on Members tab.
  2. From the Members tab, click on VPN SERVICES tab.
  3. Click on Servers list section.



STEP 2 - Choose a Server

Tomato step2.jpg


  1. You will see the list of servers, and then choose the server of your choice e.g. GTX1.ASTRILL.NET.



STEP 3 - PPTP Client Configuration

Tomato step3.jpg


  1. Open Tomato web admin, and then navigate to VPN Tunneling
  2. Then choose PPTP Client section (http://192.168.1.1/vpn-pptp.asp).
  3. For Server Address type in GTX1.ASTRILL.NET.
  4. For Username type in your Astrill account email.
  5. For Password type in your Astrill account password.
  6. For Encryption select None from drop down list.
  7. For Accept DNS configuration select Yes from drop down list.
  8. For Redirect Internet traffic tick the checkbox.
  9. For Create NAT on tunnel tick the checkbox.
  10. For MTU select Manual from drop down list, then type in 1400.
  11. For MRU select Manual from drop down list, then type in 1400.
  12. When you are done click Save button below, and to start VPN connection click Start Now button.