Difference between revisions of "Astrill Setup Manual:How to configure SSTP with Windows built-in client on Windows 7"

From Astrill Wiki
Jump to navigation Jump to search
(Created page with "Port existing article into wiki. https://www.astrill.com/knowledge-base/78/SSTP---How-to-configure-SSTP-with-Windows-built-in-client-on-Windows-7.html After step STEP 10, in...")
 
Line 1: Line 1:
Port existing article into wiki.
+
PSSTP - How to configure SSTP with Windows built-in client on Windows 7
  
https://www.astrill.com/knowledge-base/78/SSTP---How-to-configure-SSTP-with-Windows-built-in-client-on-Windows-7.html
+
STEP 1
  
After step STEP 10, insert screshot for the IP address checking.
+
Open Control Panel, then in search type in network, and click on Set up a virtual private network (VPN) connection.
 +
 
 +
[[File:1.jpg]]
 +
 
 +
STEP 2
 +
 
 +
On Set Up a Connection or Network screen, select Connect to a workplace, then click on Next button.
 +
 
 +
[[File:2.jpg]]
 +
 
 +
STEP 3
 +
 
 +
On Connect to a Workplace screen, select Use my Internet connection (VPN).
 +
 
 +
[[File:3.jpg]]
 +
 
 +
STEP 4
 +
 
 +
On next Connect to a Workplace screen, for Internet address type in GTX1.ASTRILL.NET, for Destination name type in Astrill SSTP. Click on Don't connect; just set it up so I can connect later checkbox, and then click on Next button. Full list of available VPN servers can be found on Members section, (https://members.astrill.com/servers-list.php).
 +
 
 +
[[File:4.jpg]]
 +
 
 +
STEP 5
 +
 
 +
On next Connect to a Workplace screen, for Username type in your Astrill account email, and for Password type in your Astrill account password. Click on Remember this password checkbox, and then click on Create button.
 +
 
 +
[[File:5.jpg]]
 +
 
 +
STEP 6
 +
 
 +
On next Connect to a Workplace screen, click on Close button.
 +
 
 +
[[File:6.jpg]]
 +
 
 +
STEP 7
 +
 
 +
Click on Network icon in tray, under Dial-up and VPN, right-click on Astrill SSTP, and select Properties.
 +
 
 +
[[File:7.jpg]]
 +
 
 +
STEP 8
 +
 
 +
On Astrill SSTP Properties screen, click on Security tab, for Type of VPN select Secure Socket Tunneling Protocol (SSTP), then click on OK button.
 +
 
 +
[[File:8.jpg]]
 +
 
 +
STEP 9
 +
 
 +
Click on Network icon in tray, under Dial-up and VPN, click on Astrill SSTP, and click on Connect button.
 +
 
 +
[[File:9.jpg]]
 +
 
 +
STEP 10  
 +
 
 +
On Connect Astrill SSTP screen, click on Connect button.
 +
 
 +
[[File:10.jpg]]
 +
 
 +
* You can check our IP address just to be sure. https://www.astrill.com/check-ip.php
 +
 
 +
[[File:Ipadd.jpg.jpg]]
 +
 
 +
STEP 11
 +
 
 +
Click on Network icon in tray, under Dial-up and VPN, click on Astrill SSTP, you will see status connected. Which indicates you are successfully connected to Astrill SSTP VPN. To disconnect from Astrill SSTP, simply click on Disconnect button.
 +
 
 +
[[File:11.jpg]]

Revision as of 22:33, 10 September 2012

PSSTP - How to configure SSTP with Windows built-in client on Windows 7

STEP 1

Open Control Panel, then in search type in network, and click on Set up a virtual private network (VPN) connection.

File:1.jpg

STEP 2

On Set Up a Connection or Network screen, select Connect to a workplace, then click on Next button.

2.jpg

STEP 3

On Connect to a Workplace screen, select Use my Internet connection (VPN).

3.jpg

STEP 4

On next Connect to a Workplace screen, for Internet address type in GTX1.ASTRILL.NET, for Destination name type in Astrill SSTP. Click on Don't connect; just set it up so I can connect later checkbox, and then click on Next button. Full list of available VPN servers can be found on Members section, (https://members.astrill.com/servers-list.php).

4.jpg

STEP 5

On next Connect to a Workplace screen, for Username type in your Astrill account email, and for Password type in your Astrill account password. Click on Remember this password checkbox, and then click on Create button.

5.jpg

STEP 6

On next Connect to a Workplace screen, click on Close button.

6.jpg

STEP 7

Click on Network icon in tray, under Dial-up and VPN, right-click on Astrill SSTP, and select Properties.

File:7.jpg

STEP 8

On Astrill SSTP Properties screen, click on Security tab, for Type of VPN select Secure Socket Tunneling Protocol (SSTP), then click on OK button.

8.jpg

STEP 9

Click on Network icon in tray, under Dial-up and VPN, click on Astrill SSTP, and click on Connect button.

9.jpg

STEP 10

On Connect Astrill SSTP screen, click on Connect button.

10.jpg

File:Ipadd.jpg.jpg

STEP 11

Click on Network icon in tray, under Dial-up and VPN, click on Astrill SSTP, you will see status connected. Which indicates you are successfully connected to Astrill SSTP VPN. To disconnect from Astrill SSTP, simply click on Disconnect button.

11.jpg