Astrill Setup Manual:How to configure IKEv2 IPsec VPN on Windows Phone 8.1

From Astrill Wiki
Revision as of 00:49, 1 December 2020 by Irfan (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Attention! IKEv2/IPSEC protocol won't be supported by Astrill after 1st January, 2021.


STEP 1


Open the Settings and then open VPN.

Windows-Phone-8-1-IKEv2-IPsec-VPN-connection-setup-01.png

STEP 2


Tap on VPN set up.

Windows-Phone-8-1-IKEv2-IPsec-VPN-connection-setup-02.png

STEP 3


Tap on +.

Windows-Phone-8-1-IKEv2-IPsec-VPN-connection-setup-03.png

STEP 4


Here is a link to all Astrill VPN servers. To make setup even easier, server names are the same for all VPN types. https://members.astrill.com/tools/vpn-servers

1. For Server name or IP address type in GST.ASTRILL.NET (always check Servers List)
2. For Type select IKEv2.
3. For Connect using select user name + password
4. For User name type in Your Astrill VPN membership email
5. For Password type in Your Astrill VPN membership password
6. Once you are done, tap on Save button

Windows-Phone-8-1-IKEv2-IPsec-VPN-connection-setup-04.png

STEP 5


Windows mobile automatically establishes a VPN connection, if the connection has been established successfully it should look like this.

Windows-Phone-8-1-IKEv2-IPsec-VPN-connection-setup-05.png

STEP 6


Let's check our IP address just to be sure. https://www.astrill.com/what-is-my-ip

Windows-Phone-8-1-IKEv2-IPsec-VPN-connection-setup-06.png